‧Preset table height.
Only one touch is needed to reach the
preset table height either for
the delivery position or getting on and off position. |
‧The lowest table height
of 61 cm for getting onto the table. It
is easy quick the patients
to sit onto the table when it reaches the lowest height of
61 cm. |
‧Three positions of the
table height presetting. D500H
and D500HA types provide a
select switch to choice one of three preset height positions
for delivery thus providing
adequate flexibility to the customers after installation. |
‧Full ranges of operation.
Table height, back section
angle, and seat angle can be
adjusted through their full ranges by respective foot switches
when needed. |
‧Single switch operation
for trendelenburg. Rapid trendelenburg
positioning is operated
by a single foot switch. Straight-line tilt may be adjusted
from 0 to 10 degrees. |
‧Fault tolerance design.
Should a limit switch fail,
there will be no impact on the operation.
The table still can be operated in a fail soft mode and a buzzer
as well as a warning light
will be activated at the same time. |
‧A wide range of accessories.
There are many accessories
can be selected by the
customers according to their needs such as head side handle,
waist side handles,
pillow, arm boards, contamination funnel, contamination tube,
contamination bucket,
auxiliary top, leg crutches, and foot rests. |
‧Power driven auxiliary
table top. The auxiliary table
top is integrated with the D500
series delivery table. It can be extended up to 60cm out of
the delivery table and be
stopped at any point you want. After extending to its limit,
it will keep moving upward about
209mm to the same level at that of delivery table unless being
stopped by the operator in
advance. When the auxiliary table top is moving, a paragraph
of music can be heard for
your notice. |
‧Specifications
Table top : 650 x 1240mm / 650 x 1860mm
(with auxiliary top)
Table height : adjustable from 610mm to 1200mm
Back section : adjustable from -10 to 70 degrees
Seat section : adjustable form 0 to 20 degrees
Input power : D500 / D500H ....... AC110V, 50/60 Hz
D500A / D500HA ...........AC220V, 50/60 Hz |